| NSK 420TFD6201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da min.:581 mm; Basic dynamic load rating C:995 kN; Fatigue load limit Pu:102 kN; Da max.:549 mm; Limiting speed:560 r/min; Reference speed:400 r/min; ra max.:4 mm; D:650 mm; D1 ≈:486 mm; d:480 mm; Mass bearing (including seat washer where applicable):130 kg; Basic static load rating C0:6550 kN; H:135 mm; d1 ≈:644 mm; r1,2 min.:5 mm; Minimum load factor A:220; |
| SKF 350901C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A:68.263 mm; da:76.2 mm; S:0.794 mm; A1:95.25 mm; J min.:198.438 mm; L:265.113 mm; s:31.75 mm; Mass bearing unit:9.53 kg; H2:57.15 mm; Limiting speed:3400 r/min; d2:111.125 mm; Attachment bolt diameter G:19.05 mm; Basic dynamic load rating C:158 kN; H1:82.55 mm; H:165.894 mm; B:92.075 mm; J max.:223.838 mm; |
| 522837 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | b:8 mm; Recommended tightening torque:8.4 N·m; h:3.5 mm; B:28 mm; d3:90 mm; d5:89 mm; G:M 65x2; Mass:0.63 kg; Associated spanner (Hook spanner in accordance with DIN 1810):HN 14; Grub (set) / Locking screw size:M 5; d1:85 mm; |
| FAG 509391 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:20.60 mm; Accessories:Two Seals; d:25.000 mm; Sealed Speed Rating n3:8000 rpm; Basic Static Radial Load Rating Co:21200 N; Grease Speed Rating n1:8000 rpm; Fillet Radius ra:1.00 mm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:22900 N; Oil Speed Rating n2:11000 rpm; |
| 511746 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B1:5 mm; d1 ≈:58.95 mm; d:45 mm; B2:8.5 mm; r3,4 min.:1.1 mm; Mass angle ring:0.052 kg; |
| 520560Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ba:65.088 mm; J max.:463.55 mm; Initial grease fill:623.7 g; Pa:32.7 kN; L:539.75 mm; Cap bolt:7/8-9 UNC; R1:95.25 mm; P90°:236 kN; P150°:136 kN; Stabilizing ring:SR-30-0; RG:3/4 NPT; PG:1/4 NPT; N1:28.575 mm; Appropriate attachment bolt size G:1 in; da:130.175 mm; H:317.5 mm; Da:269.999 mm; Cap bolt, SAE grade:8; H1:160.35 mm; h:50.8 mm; |
| NSK 230TFD4101 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil Speed Rating Open/Shielded n2:7000 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Dynamic Radial Load Rating C:59400 N; D:100.0000 mm; Accessories:One Shield; d:45.000 mm; B:25.00 mm; Basic Static Radial Load Rating Co:46500 N; |
| 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Permissible sliding velocity v min.:0.25 m/s; d:15 mm; Permissible sliding velocity v max.:5 m/s; D:19 mm; Mass bushing:0.01 kg; B:15 mm; |
| NTN CRTD8201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da max.:53.7 mm; rb max.:0.3 mm; a:22.1 mm; db min.:49.6 mm; Static axial stiffness, preload class A:132 N/µm; db max.:53.7 mm; r3,4 min.:0.3 mm; Basic dynamic load rating C:27.6 kN; d2:54.2 mm; Attainable speed for grease lubrication:17000 r/min; D:75 mm; Da max.:70.4 mm; Preload class A GA:170 N; Calculation factor f2C:1.05; Calculation factor (back-to-back, face-to-face) Y2:1.41; Static axial stiffness, preload class D:309 N/µm; |
| FAG 524902 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P60°:94.3 kN; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.875 in; L:387.35 mm; Cap bolt recommended tightening torque:515.2 N·m; R1:65.088 mm; Initial grease fill:365.71 g; J max.:333.375 mm; RG:3/8 NPT; A1:111.125 mm; P180°:38.3 kN; Labyrinth ring:2 x LOR 182; N1:25.4 mm; H1:114.3 mm; R2:30.163 mm; Mass pillow block:31.4 kg; Pa:10.5 kN; End plug (suffix Y):EPR 10; A2:173.037 mm; |
| SKF 351019C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:77 kN; H2:33.337 mm; A1:77.787 mm; H:109.537 mm; A:58.737 mm; J min.:131.762 mm; s:25.4 mm; Mass bearing unit:3.65 kg; Attachment bolt diameter G:12.7 mm; J max.:152.4 mm; L:187.325 mm; Limiting speed:1600 r/min; da:44.45 mm; S:0.794 mm; H1:53.975 mm; B:73.025 mm; d2:68.659 mm; |
| SKF 353151 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass bearing unit:5.44 kg; da:55.563 mm; H2:41.275 mm; A:60.325 mm; L:225.425 mm; H:129.778 mm; H1:63.5 mm; S:0.794 mm; Basic dynamic load rating C:99.6 kN; Limiting speed:4500 r/min; B:79.375 mm; s:28.575 mm; J min.:163.512 mm; J max.:187.325 mm; Attachment bolt diameter G:15.875 mm; d2:82.55 mm; A1:81.756 mm; |
| 829244 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r, r1,2 min.:0.3 mm; Mass inner ring:0.029 kg; B:20 mm; F:32 mm; d:28 mm; |
| FAG 515196 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A2:368.3 mm; Taconite seal:TER 168; da:203.2 mm; H:473.075 mm; P120°:260 kN; Mass pillow block:356 kg; Da:399.999 mm; R1:130.175 mm; P150°:236 kN; Stabilizing ring:SR-44-38; S:4.763 mm; Appropriate attachment bolt size G:1.5 in; End plug (suffix Y):EPR 23; L:831.85 mm; Max. speed for Taconite seal:385 r/min; P90°:414 kN; R2:46.831 mm; P180°:285 kN; J1:133.35 mm; A1:222.25 mm; |