| NSK130TFD2801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d2:1060 mm; D:1400 mm; E:mm; d2 (max):mm; F:1155 mm; B:195 mm; Static (Coa):12800 kN; rs (min):10 mm; Dynamic (Ca):5410 kN; b:mm; b1:mm; s:20 mm; r1s (min):10 mm; Pu:735.230 kN; |
| FAG 522008 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | L:136.525 mm; A6:19.05 mm; A:58.737 mm; Limiting speed:5100 r/min; Basic dynamic load rating C:73.8 kN; N1:14.287 mm; Attachment bolt diameter G:12.7 mm; da:38.1 mm; S:0.794 mm; d2:62.706 mm; A1:73.819 mm; J:104.775 mm; B:69.85 mm; a:3.969 mm; Mass bearing unit:4.54 kg; s:25.4 mm; A5:29.369 mm; |
| NSK 380TFD5601 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:100.000 mm; Oil Speed Rating n2:3000 rpm; D:180.0000 mm; B:60.30 mm; Basic Static Radial Load Rating Co:166000 N; Sealed Speed Rating n3:2000 rpm; Basic Dynamic Radial Load Rating C:178000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2000 rpm; Accessories:No Shield, no Seal; |
| NSK 460TFD6801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra max.:1.5 mm; Basic static load rating C0:3450 kN; Fatigue load limit Pu:43 kN; Minimum load factor A:62; Limiting speed:800 r/min; D1 ≈:852.5 mm; Mass bearing (including seat washer where applicable):34.5 kg; d:850 mm; Reference speed:560 r/min; d1 ≈:917.5 mm; r1,2 min.:1.5 mm; Basic dynamic load rating C:377 kN; H:53 mm; da min.:891 mm; D:920 mm; Da max.:879 mm; |
| FAG 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Housing:SSAFS 526; P90°:185 kN; Stabilizing ring:SR-26-0; P150°:118 kN; A2:203.2 mm; S:4.763 mm; P180°:151 kN; Labyrinth ring:2 x LOR 117; L:466.725 mm; Pa:24.9 kN; Cap bolt recommended tightening torque:515.2 N·m; P60°:308 kN; ba:57.944 mm; A1:130.175 mm; RG:1/2 NPT; P120°:125 kN; Ca:73.812 mm; R2:36.513 mm; H1:152.4 mm; End plug (suffix Y):EPR 15; |
| FAG 567356 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | R1:21 mm; Basic static load rating C0:11.2 kN; N:11.5 mm; L:83 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; T:42.2 mm; A5:22.5 mm; Db2:83 mm; Mass bearing unit:0.88 kg; Thread grub screw G2:1/4-28 UNF; Basic dynamic load rating C:19.5 kN; s1:22.2 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; N4:2 mm; Rα:45 °; B:38.1 mm; B4:5 mm; Hexagonal key size for grub screw N:3.175 mm; |
| 527907 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass bearing:8.2 kg; r1,2 min.:3 mm; Calculation factor e:0.37; Basic dynamic load rating C:151 kN; Fatigue load limit Pu:2.5 kN; D:190 mm; Permissible angular misalignment α:3 °; Da max.:176 mm; Calculation factor Y1:1.7; B:64 mm; Calculation factor kr:0.05; d:90 mm; D1 ≈:162.2 mm; ra max.:3 mm; Calculation factor Y0:1.8; Basic static load rating C0:57 kN; Reference speed:6300 r/min; Calculation factor Y2:2.6; |
| SKF 353162 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius ra:2.00 mm; B:61.90 mm; Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:154000 N; Basic Static Radial Load Rating Co:163000 N; d:65.000 mm; Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; Accessories:One Seal; |
| 829234 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A5:20.5 mm; R1:21 mm; L:95 mm; Db1:65 mm; A1:12 mm; s1:19.8 mm; Basic dynamic load rating C:14 kN; J7:19 mm; A3:3.2 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; Fatigue load limit Pu:0.335 kN; N:11.5 mm; Recommended tightening torque for grub screw:4 N·m; Thread grub screw G2:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.375 in; Da:74.6 mm; GN:1/4-28 SAE-LT; |
| 522372Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1:113 mm; Mass housing washer:0.88 kg; D:160 mm; B:11.5 mm; r1,2 min.:1.1 mm; |
| 567356 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:34.925 mm; RG:1/4-28 UNF; s1:32.3 mm; Basic dynamic load rating C:25.5 kN; Recommended diameter for attachment bolts, inch G:0.5 in; J6:106 mm; A:34.5 mm; Hexagonal key size for grub screw N:4.763 mm; Basic static load rating C0:15.3 kN; Fatigue load limit Pu:0.655 kN; Da:106.4 mm; N:14 mm; Housing:FY 507 M/VZ033; L:118 mm; T:53.3 mm; Recommended tightening torque for grub screw:16.5 N·m; |
| 579703 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Pa:20.2 kN; Max. speed for Taconite seal:700 r/min; RG:3/8 NPT; R1:67.945 mm; N1:22.225 mm; Mass pillow block:32.2 kg; Stabilizing ring:2 x 38151-26; Ca:62.789 mm; J1:69.85 mm; P180°:60.9 kN; H1:125.425 mm; A2:234.95 mm; End plug (suffix Y):EPR 15; R2:31.75 mm; h:42.862 mm; P150°:50.7 kN; da:114.3 mm; Housing:SAF 026 KA; Cap bolt, SAE grade:5; Initial grease fill:232.47 g; |
| 522837 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | b:8 mm; Recommended tightening torque:8.4 N·m; h:3.5 mm; B:28 mm; d3:90 mm; d5:89 mm; G:M 65x2; Mass:0.63 kg; Associated spanner (Hook spanner in accordance with DIN 1810):HN 14; Grub (set) / Locking screw size:M 5; d1:85 mm; |
| FAG 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:55.0000 mm; B:13.00 mm; Fillet Radius ra:1.00 mm; d:30.000 mm; Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:9650 N; Oil Speed Rating n2:14000 rpm; Basic Dynamic Radial Load Rating C:13800 N; Fillet Radius rb:0.30 mm; |