| FAG 52372 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | End plug (suffix Y):EPR 16; Cap bolt, SAE grade:5; da:138.113 mm; Mass pillow block:178 kg; RG:1 NPT; J1:114.3 mm; Cap bolt recommended tightening torque:271.2 N·m; P180°:113 kN; H:401.637 mm; ba:87.313 mm; Appropriate attachment bolt size G:1.25 in; h:68.263 mm; P60°:290 kN; S:4.763 mm; Ca:123.8 mm; N1:34.925 mm; PG:1/4 NPT; P120°:107 kN; Housing:SAF 632; PosiTrac Plus contact element:2 x B10724-130; |
| FAG 530852 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Db:115 mm; B4:9 mm; Basic dynamic load rating C:29.6 kN; Recommended diameter for attachment bolts, inch G:0.625 in; Fatigue load limit Pu:0.98 kN; B:51.6 mm; Limiting speed:2200 r/min; d:49.213 mm; N:17 mm; H:197 mm; A1:21 mm; Basic static load rating C0:23.2 kN; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; T:57.6 mm; Recommended diameter for attachment bolts, mm G:16 mm; |
| 526400Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:120.000 mm; Grease Speed Rating n1:2000 rpm; D:260.0000 mm; Oil Speed Rating n2:2600 rpm; B:110.00 mm; Basic Dynamic Radial Load Rating C:423000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:560000 N; Fillet Radius ra:2.50 mm; |
| 829748 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Appropriate attachment bolt size G:0.75 in; Bearing limiting speed:3400 r/min; Mass pillow block:26.8 kg; Cap bolt recommended tightening torque:203.4 N·m; Initial grease fill:365.71 g; P180°:48.9 kN; Housing:FSAF 220; J1:60.325 mm; PG:1/4 NPT; Ca:55.804 mm; J max.:333.375 mm; P60°:119 kN; Labyrinth ring (db shaft position):LOR 118; R2:30.163 mm; P150°:40 kN; Labyrinth ring (dc shaft position):LOR 106; |
| 545645Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:7.8 kN; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended tightening torque for grub screw:4 N·m; T:38.8 mm; Limiting speed:1500 r/min; Mass bearing unit:0.33 kg; Fatigue load limit Pu:0.335 kN; A1:15 mm; s1:19.8 mm; Basic dynamic load rating C:14 kN; Db:65 mm; d:25 mm; Hexagonal key size for grub screw N:3 mm; Thread grub screw G2:M6x0.75; |
| SKF BFDB353204 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Cap bolt, SAE grade:8; H2:44.45 mm; End plug (suffix Y):EPR 10; A2:173.037 mm; Mass pillow block:31.4 kg; Ca:69.799 mm; Bearing limiting speed:4800 r/min; L:387.35 mm; Cap bolt:2 x 3/4-10 UNC; R2:30.163 mm; Stabilizing ring:2 x SR-1617; N1:25.4 mm; P180°:38.3 kN; Housing:SAF 617; P150°:32 kN; ba:38.894 mm; P60°:94.3 kN; h:47.625 mm; Labyrinth ring:2 x LOR 185; Initial grease fill:365.71 g; |
| SKF 351182C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Reference speed:2600 r/min; Mass needle roller and cage assembly:0.27 kg; Basic static load rating C0:236 kN; Fw:155 mm; U:26 mm; Fatigue load limit Pu:25.5 kN; Basic dynamic load rating C:72.1 kN; Ew:163 mm; Limiting speed:3000 r/min; |
| 829234 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A5:20.5 mm; R1:21 mm; L:95 mm; Db1:65 mm; A1:12 mm; s1:19.8 mm; Basic dynamic load rating C:14 kN; J7:19 mm; A3:3.2 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; Fatigue load limit Pu:0.335 kN; N:11.5 mm; Recommended tightening torque for grub screw:4 N·m; Thread grub screw G2:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.375 in; Da:74.6 mm; GN:1/4-28 SAE-LT; |
| SKF 353005 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:130.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Synthetic Rubber Sea; Oil Speed Rating Open/Shielded n2:6000 rpm; B:53.98 mm; Basic Static Radial Load Rating Co:52000 N; Basic Dynamic Radial Load Rating C:81900 N; Grease Speed Rating Open/Shielded n1:5000 rpm; d:60.000 mm; |
| 530739 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass bushing:1.3 kg; Coefficient of friction µ max.:0.15; B1:8 mm; Permissible sliding velocity v min.:0 m/s; a:3.5 mm; D1:100 mm; Permissible sliding velocity v max.:0.5 m/s; d:75 mm; Specific dynamic load factor K:25 N/mm²; D:90 mm; Coefficient of friction µ min.:0.08; Tolerance housing:H7; B:70 mm; Specific static load factor K0:45 N/mm²; h:76.5 mm; α:124 °; Tolerance shaft:e7; |
| NTN CRTD7612 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | R2:26.988 mm; Mass pillow block:32.2 kg; H1:107.95 mm; J min.:269.875 mm; Initial grease fill:181.44 g; P150°:30.7 kN; ba:46.038 mm; Housing:FSAF 616; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt, SAE grade:8; L:361.95 mm; J1:53.975 mm; P180°:36.9 kN; da:68.263 mm; Da:170 mm; Appropriate attachment bolt size G:0.625 in; End plug (suffix Y):EPR 8; A2:233.363 mm; PG:1/8 NPT; |
| 519330Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Initial grease fill:136.08 g; Stabilizing ring:2 x SR-15-0; J min.:219.075 mm; A2:193.675 mm; R2:21.431 mm; da:63.5 mm; Taconite seal:TER 38; ba:30.163 mm; Cap bolt, SAE grade:5; RG:1/4 NPT; Pa:5.65 kN; Appropriate attachment bolt size G:0.625 in; H:157.559 mm; P180°:30.2 kN; P60°:75.6 kN; Cap bolt recommended tightening torque:81.3 N·m; J max.:244.475 mm; Mass pillow block:13.1 kg; |
| 524902 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra max.:2 mm; db min.:75.5 mm; rb max.:1.5 mm; Mass bearing:1.51 kg; Cb min.:5.5 mm; Dimension series:3EC; C:27 mm; Basic static load rating C0:193 kN; r1,2 min.:2 mm; r3,4 min.:1.5 mm; Calculation factor Y:1.5; a:26.558 mm; T:32.75 mm; d:65 mm; Calculation factor e:0.4; Calculation factor Y0:0.8; Da min.:104 mm; Ca min.:4 mm; Basic dynamic load rating C:186 kN; Db min.:115 mm; |
| NSK 460TFD6801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra max.:1.5 mm; Basic static load rating C0:3450 kN; Fatigue load limit Pu:43 kN; Minimum load factor A:62; Limiting speed:800 r/min; D1 ≈:852.5 mm; Mass bearing (including seat washer where applicable):34.5 kg; d:850 mm; Reference speed:560 r/min; d1 ≈:917.5 mm; r1,2 min.:1.5 mm; Basic dynamic load rating C:377 kN; H:53 mm; da min.:891 mm; D:920 mm; Da max.:879 mm; |