| FAG 532584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | α:6 °; B:25 mm; Mass plain bearing:0.23 kg; Lubricant:Regular relubricatio; b:3.9 mm; Sealing solution:Triple-lip seals; b1:3.9 mm; Basic static load rating C0:400 kN; D:55 mm; da min.:38.5 mm; M:2.5 mm; rb max.:1 mm; dk:47 mm; Material constant KM:330; r2 min.:1 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Specific dynamic load factor K:100 N/mm²; ra max.:0.6 mm; |
| 567356 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:34.925 mm; RG:1/4-28 UNF; s1:32.3 mm; Basic dynamic load rating C:25.5 kN; Recommended diameter for attachment bolts, inch G:0.5 in; J6:106 mm; A:34.5 mm; Hexagonal key size for grub screw N:4.763 mm; Basic static load rating C0:15.3 kN; Fatigue load limit Pu:0.655 kN; Da:106.4 mm; N:14 mm; Housing:FY 507 M/VZ033; L:118 mm; T:53.3 mm; Recommended tightening torque for grub screw:16.5 N·m; |
| 829748 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Appropriate attachment bolt size G:0.75 in; Bearing limiting speed:3400 r/min; Mass pillow block:26.8 kg; Cap bolt recommended tightening torque:203.4 N·m; Initial grease fill:365.71 g; P180°:48.9 kN; Housing:FSAF 220; J1:60.325 mm; PG:1/4 NPT; Ca:55.804 mm; J max.:333.375 mm; P60°:119 kN; Labyrinth ring (db shaft position):LOR 118; R2:30.163 mm; P150°:40 kN; Labyrinth ring (dc shaft position):LOR 106; |
| 579703 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Pa:20.2 kN; Max. speed for Taconite seal:700 r/min; RG:3/8 NPT; R1:67.945 mm; N1:22.225 mm; Mass pillow block:32.2 kg; Stabilizing ring:2 x 38151-26; Ca:62.789 mm; J1:69.85 mm; P180°:60.9 kN; H1:125.425 mm; A2:234.95 mm; End plug (suffix Y):EPR 15; R2:31.75 mm; h:42.862 mm; P150°:50.7 kN; da:114.3 mm; Housing:SAF 026 KA; Cap bolt, SAE grade:5; Initial grease fill:232.47 g; |
| 534038 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Preload class B GB:120 N; d2:49.2 mm; Calculation factor fHC:1; Calculation factor f1:1; Calculation factor f2A:1; Db max.:66 mm; Fatigue load limit Pu:0.465 kN; D1:58.8 mm; r3,4 min.:0.3 mm; Calculation factor f2C:1.05; r1,2 min.:1 mm; Preload class A GA:60 N; Static axial stiffness, preload class D:96 N/µm; Basic static load rating C0:11 kN; Calculation factor f0:10; Static axial stiffness, preload class C:69 N/µm; |
| FAG 52372 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | End plug (suffix Y):EPR 16; Cap bolt, SAE grade:5; da:138.113 mm; Mass pillow block:178 kg; RG:1 NPT; J1:114.3 mm; Cap bolt recommended tightening torque:271.2 N·m; P180°:113 kN; H:401.637 mm; ba:87.313 mm; Appropriate attachment bolt size G:1.25 in; h:68.263 mm; P60°:290 kN; S:4.763 mm; Ca:123.8 mm; N1:34.925 mm; PG:1/4 NPT; P120°:107 kN; Housing:SAF 632; PosiTrac Plus contact element:2 x B10724-130; |
| 82978 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:140 mm; db min.:577 mm; Da max.:732 mm; Limiting speed:850 r/min; Mass bearing + sleeve:260 kg; D:750 mm; s1 max.:32.4 mm; d1:530 mm; B5:97 mm; d3:650 mm; ra max.:4 mm; D1 ≈:701 mm; da max.:648 mm; d2 ≈:621 mm; B2:75 mm; Da min.:682 mm; Basic dynamic load rating C:3600 kN; Reference speed:600 r/min; Ba min.:20 mm; Misalignment factor k1:0.128; |
| SKF BFDB353200/HA3 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | rs Dynamic (Cr):1.5 mm; Grease:0.780 kN; Oil:5 000 min-1; with tapered bore:2214 ; B1:mm; D:125 mm; Pu:17.100 kN; d:70 mm; with cylindrical bore:6 000 min-1; B:31 mm; Static (Cor):45.220 kN; |
| 547584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Calculation factor (back-to-back, face-to-face) Y1:0.92; Basic dynamic load rating C:16.3 kN; Da max.:89 mm; D2:85.4 mm; Preload class C GC:870 N; Preload class A GA:150 N; Calculation factor (single, tandem) Y2:0.87; d2:70.6 mm; Db max.:90.8 mm; Calculation factor e:0.68; Calculation factor f:1.08; Calculation factor f2C:1.06; r3,4 min.:0.6 mm; Calculation factor f2A:1; d1:72.74 mm; Calculation factor fHC:1.01; |
| NTN CRTD5216 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Ca min.:3 mm; Calculation factor e:0.37; Basic dynamic load rating C:65.8 kN; Da max.:62 mm; d1 ≈:50.7 mm; D:69.012 mm; Dimension series:14000; a:15.343 mm; Calculation factor Y0:0.9; Db min.:63 mm; T:19.845 mm; da max.:43 mm; rb max.:1.3 mm; Reference speed:8000 r/min; Basic static load rating C0:67 kN; r3,4 min.:1.3 mm; Da min.:57 mm; C:15.875 mm; Calculation factor Y:1.6; Mass bearing:0.35 kg; |
| NSK 220TFD3001 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Dimension A1:0.9844 in; Dimension H2:0.7500 in; Basic Dynamic Radial Load Rating:3510 lbf; Height H:3.2344 in; Shaft Diameter D:1 3/16 in; Dimension L:6.2500 in; Insert Bearing IB:Stainless Steel; Dimension N:0.8281 in; Distance JMAX:5.0469 in; Distance JMIN:4.2500 in; Width A:1.5781 in; Weight W:1.04 lb; Dimension N1:0.5469 in; Dimension S1:0.8750 in; Basic Static Radial Load Rating Co:2520 lbf; Dimension H1:1.6875 in; |
| 590118Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating n1:2800 rpm; Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.00 mm; d:70.000 mm; D:150.0000 mm; B:63.50 mm; Basic Dynamic Radial Load Rating C:153000 N; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:2800 rpm; Accessories:Shield & Seal & Snap; |
| FAG 528294 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | rb max.:4 mm; Design variant/feature:NNU/W33; d:440 mm; Mass bearing:450 kg; ra max.:5 mm; F:511 mm; Basic dynamic load rating C:5720 kN; D:720 mm; db min.:516 mm; B:280 mm; b:22.3 mm; da max.:500 mm; s max.:10.8 mm; Limiting speed:900 r/min; K:12 mm; r1,2 min.:6 mm; Calculation factor kr:0.34; Da max.:694 mm; Fatigue load limit Pu:900 kN; Basic static load rating C0:11800 kN; |
| 829244 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | r, r1,2 min.:0.3 mm; Mass inner ring:0.029 kg; B:20 mm; F:32 mm; d:28 mm; |