| No. | Brand | d | F | b | L | G | H | s | N |
| 522837 | - | - | - | 8 mm | - | M 65x2 | - | - | - |
| FAG 567356 | - | - | - | - | 83 mm | - | - | - | 11.5 mm |
| FAG 532584 | - | - | - | 3.9 mm | - | - | - | - | - |
| NSK 250TFD3801 | - | 420 mm | - | - | - | - | - | - | - |
| 526400Y | - | 120.000 mm | - | - | - | - | - | - | - |
| FAG 540295 | - | 95.000 mm | - | - | - | - | - | - | - |
| SKF 351475C | - | 10.000 mm | - | - | - | - | - | - | - |
| 52474 | - | - | - | - | 361.95 mm | - | 209.55 mm | - | - |
| FAG 52372 | - | - | - | - | - | - | 401.637 mm | - | - |
| 526360Y | - | - | - | - | - | - | - | - | - |
| FAG 52474 | - | 80 mm | - | 3.1 mm | - | - | - | - | - |
| 530739 | - | 75 mm | - | - | - | - | - | - | - |
| FAG 527907 | - | 150 mm | - | - | - | - | 60 mm | - | - |
| FAG 528974 | - | 30.000 mm | - | - | - | - | - | - | - |
| NTN CRTD11002 | - | 260.000 mm | - | - | - | - | - | - | - |
| 550760Y | - | - | - | - | 244.475 mm | - | 127 mm | 28.575 mm | - |
| 579703 | - | - | - | - | - | - | - | - | - |
| 5634 | - | 22 mm | - | - | - | - | - | - | - |
| NTN CRTD4013 | - | - | - | - | 628.65 mm | - | 360.363 mm | - | - |
| 524134 | - | - | - | - | 200.025 mm | - | 107.95 mm | 25.4 mm | - |
| 829232 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:30 mm; d:80 mm; F:90 mm; Mass inner ring:0.3 kg; r, r1,2 min.:1 mm; |
| NTN CRTD8801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da max.:264 mm; Calculation factor kr:0.095; r1,2 min.:2.1 mm; K:7.5 mm; Reference speed:2200 r/min; Calculation factor Y1:0.73; D1 ≈:266 mm; b:22 mm; Fatigue load limit Pu:6.3 kN; Calculation factor Y2:1.17; Basic dynamic load rating C:178 kN; d:200 mm; Basic static load rating C0:232 kN; Calculation factor e:0.86; Calculation factor Y0:0.63; D:289.5 mm; d1 ≈:231.1 mm; Mass bearing:16.4 kg; |
| NTN CRTD4013 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | H2:69.85 mm; Cap bolt, SAE grade:5; Da:309.999 mm; ba:74.612 mm; Labyrinth ring:2 x LOR 160; J min.:492.125 mm; J max.:549.275 mm; H:360.363 mm; L:628.65 mm; R1:115.888 mm; da:184.15 mm; P90°:140 kN; Cap bolt recommended tightening torque:203.4 N·m; P60°:234 kN; RG:3/4 NPT; P120°:85.9 kN; h:49.212 mm; R2:37.306 mm; Max. speed for PosiTrac Plus seal:800 r/min; End plug (suffix Y):EPR 21; |
| NTN CRTD3401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Accessories:Two Shields; Basic Static Radial Load Rating Co:125000 N; D:150.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; d:70.000 mm; B:63.50 mm; Grease Speed Rating n1:2800 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; |
| SKF 353002 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:108000 N; D:210.0000 mm; B:33.00 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:111000 N; d:140.000 mm; Sealed Speed Rating n3:1800 rpm; Accessories:Seal & Snap-Ring; Grease Speed Rating Open/Shielded n1:3000 rpm; Oil Speed Rating Open/Shielded n2:3600 rpm; |
| FAG 513125 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic static load rating C0:85000 kN; db min.:1358 mm; Basic dynamic load rating C:36900 kN; ra max.:6 mm; Limiting speed:240 r/min; da max.:1320 mm; r1,2 min.:15 mm; b:22.3 mm; Reference speed:180 r/min; B:670 mm; D1 ≈:1655 mm; D:1850 mm; Design variant/feature:NNU/W33; da min.:1227 mm; r3,4 min.:7.5 mm; Calculation factor kr:0.36; d:1180 mm; s max.:32.4 mm; Mass bearing:7200 kg; Da max.:1817 mm; |
| 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Dynamic Radial Load Rating C:4030 N; d:15.000 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Accessories:Two Shields; Sealed Speed Rating n3:16000 rpm; Grease Speed Rating Open/Shielded n1:24000 rpm; Basic Static Radial Load Rating Co:2040 N; B:7.00 mm; D:28.0000 mm; |
| 545678 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Limiting speed:11000 r/min; Basic dynamic load rating C:39.1 kN; Fw:42 mm; Basic static load rating C0:86.5 kN; Da max.:50 mm; C:30 mm; Reference speed:9500 r/min; Mass bearing:0.13 kg; ra max.:0.3 mm; Fatigue load limit Pu:10.8 kN; D:52 mm; r1,2 min.:0.3 mm; |
| FAG 532584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | α:6 °; B:25 mm; Mass plain bearing:0.23 kg; Lubricant:Regular relubricatio; b:3.9 mm; Sealing solution:Triple-lip seals; b1:3.9 mm; Basic static load rating C0:400 kN; D:55 mm; da min.:38.5 mm; M:2.5 mm; rb max.:1 mm; dk:47 mm; Material constant KM:330; r2 min.:1 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Specific dynamic load factor K:100 N/mm²; ra max.:0.6 mm; |
| SKF 353005 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:130.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Accessories:Synthetic Rubber Sea; Oil Speed Rating Open/Shielded n2:6000 rpm; B:53.98 mm; Basic Static Radial Load Rating Co:52000 N; Basic Dynamic Radial Load Rating C:81900 N; Grease Speed Rating Open/Shielded n1:5000 rpm; d:60.000 mm; |
| 522372Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D1:113 mm; Mass housing washer:0.88 kg; D:160 mm; B:11.5 mm; r1,2 min.:1.1 mm; |
| NTN CRTD7612 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | R2:26.988 mm; Mass pillow block:32.2 kg; H1:107.95 mm; J min.:269.875 mm; Initial grease fill:181.44 g; P150°:30.7 kN; ba:46.038 mm; Housing:FSAF 616; Cap bolt recommended tightening torque:515.2 N·m; Cap bolt, SAE grade:8; L:361.95 mm; J1:53.975 mm; P180°:36.9 kN; da:68.263 mm; Da:170 mm; Appropriate attachment bolt size G:0.625 in; End plug (suffix Y):EPR 8; A2:233.363 mm; PG:1/8 NPT; |
| FAG 579704 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | s:440 mm; B1:222 mm; d:800 mm; Minimum axial load factor A:290; Limiting speed:450 r/min; Basic static load rating C0:55000 kN; Fatigue load limit Pu:3900 kN; D:1180 mm; H:230 mm; da min.:985 mm; Basic dynamic load rating C:11300 kN; Da max.:1060 mm; D1 ≈:958 mm; B:78 mm; r1,2 min.:9.5 mm; Mass bearing:810 kg; Reference speed:240 r/min; ra max.:8 mm; d1 ≈:1099 mm; C:117 mm; |
| 534038 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Preload class B GB:120 N; d2:49.2 mm; Calculation factor fHC:1; Calculation factor f1:1; Calculation factor f2A:1; Db max.:66 mm; Fatigue load limit Pu:0.465 kN; D1:58.8 mm; r3,4 min.:0.3 mm; Calculation factor f2C:1.05; r1,2 min.:1 mm; Preload class A GA:60 N; Static axial stiffness, preload class D:96 N/µm; Basic static load rating C0:11 kN; Calculation factor f0:10; Static axial stiffness, preload class C:69 N/µm; |
SKF 350980C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS Video
SKF 350980 C Ball Thrust Bearings - Tapered Roller Bearings
SKF 350980 C Ball Thrust Bearings. ... SKF 350980 C Ball Thrust Bearings. $1,583.10. 350980 C,350980C BRG. Availability: In stock. Quantity: Add to Cart
SKF 350980 C - Ball Bearings
SKF 350980 C Bearing Details： Bearing Name 350980 C New Model 350980C Old Model bearing product Model 350980C Category Thrust Roller Bearings
skf 350980C Bearings - skf bearings,fag bearings,nsk
SKF 350980C Bearings Hongkong NKF Machinery Co.,Limited. ---a professional agency of well-known brands bearings,including SKF bearings, FAG bearings,
Tapered roller thrust bearings-SKF 350980 C Bearing
SKF 350980 C Tapered roller thrust bearings. Rolling mill bearings are my company leading products,widely used in steel rolling, metallurgy,petrpleum
SKF 350980 C TAPERED ROLLER BRGS ... - Walmart
Free 2-day shipping. Buy SKF 350980 C TAPERED ROLLER BRGS FACTORY NEW at Walmart.com
350980C SKF • ABF Store
350980C SKF available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8 languages
Tapered roller thrust bearings
SKF tapered roller thrust bearings are designed to accommodate heavy axial loads and peak loads. The bearings are very stiff and require little axial space
SKF - 350980 C - Motion Industries
Buy SKF Ball Thrust Bearings 350980 C direct from Motion Industries. Your proven service leader with reliable delivery since 1972
SKF | 350980 C | Thrust Roller Bearing | Applied
Shop SKF 350980 C at Applied.com, which includes; Thrust Roller Bearing, 170 mm ID, 240 mm OD, 84 mm Width, Tapered Bore