| 829788 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Initial grease fill:793.8 g; Stabilizing ring:2 x 38151-38; A2:225.425 mm; R2:33.337 mm; Eye bolt:2 x 3/8-16 UNC; ba:69.85 mm; Da:289.999 mm; PG:1/4 NPT; A1:158.75 mm; H:338.137 mm; Ca:89.789 mm; da:173.037 mm; h:47.625 mm; Pa:42.9 kN; H1:169.875 mm; Mass pillow block:132 kg; P180°:145 kN; R1:104.775 mm; P150°:120 kN; P120°:133 kN; |
| 513280Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Pa:13.8 kN; Max. speed for Taconite seal:900 r/min; P180°:48.9 kN; RG:3/8 NPT; H2:44.45 mm; h:42.069 mm; Mass pillow block:28.1 kg; P120°:44.5 kN; Stabilizing ring:SR-20-17; N1:22.225 mm; R1:58.737 mm; Taconite seal:TER 101; Cap bolt, SAE grade:5; J1:60.325 mm; J min.:295.275 mm; S:4.763 mm; Initial grease fill:181.44 g; Appropriate attachment bolt size G:0.75 in; ba:44.45 mm; PG:1/4 NPT; |
| 52474 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ba:36.513 mm; End plug (suffix Y):EPR 10; Mass pillow block:28.6 kg; Stabilizing ring:2 x SR-1616; Ca:67.793 mm; J1:53.975 mm; PosiTrac Plus contact element (dc shaft position):B10724-184; A2:160.338 mm; P60°:92.5 kN; Cap bolt recommended tightening torque:298.3 N·m; Labyrinth ring (dc shaft position):LOR 60; H:209.55 mm; da:80 mm; J min.:269.875 mm; db:92.075 mm; L:361.95 mm; R1:63.5 mm; |
| 2THR846217 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:200.0000 mm; Basic Dynamic Radial Load Rating C:168000 N; B:45.00 mm; Basic Static Radial Load Rating Co:150000 N; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:2800 rpm; Fillet Radius ra:2.50 mm; d:95.000 mm; |
| 829976 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Static Radial Load Rating Co:51000 N; D:140.0000 mm; d:90.000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Basic Dynamic Radial Load Rating C:61800 N; Fillet Radius ra:1.50 mm; B:24.00 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:5600 rpm; Sealed Speed Rating n3:2800 rpm; |
| NTN CRTD6104 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | dynamic Cr:79.240 kN; Grease:2 700 min-1; H:28 mm; rs (min):1 mm; D:70 mm; Pu:5.730 kN; Oil:3 500 min-1; static Cor:126.000 kN; d1:70 mm; D1:32 mm; d:30 mm; |
| NTN CRTD7012 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:54.00 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:121000 N; d:60.000 mm; D:130.0000 mm; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; Basic Static Radial Load Rating Co:95000 N; Grease Speed Rating n1:3400 rpm; |
| 523410Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | PG:1/4 NPT; J min.:549.275 mm; db:212.725 mm; P90°:173 kN; Taconite seal (db shaft position):TER 171; Ca:101.803 mm; H1:200.025 mm; Eye bolt:2 x 1/2-13 UNC; End plug (suffix Y):EPR 21; Da:339.999 mm; H:401.637 mm; N1:34.925 mm; Pa:73.4 kN; J max.:619.125 mm; R2:42.069 mm; P60°:290 kN; Max. speed for Taconite seal:365 r/min; Appropriate attachment bolt size G:1.25 in; L:711.2 mm; Initial grease fill:1672.65 g; |
| 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | with cylindrical bore:600 min-1; Static (Cor):22.3 mm; with tapered bore:750 min-1; rs (min):5 mm; Pu:3120 kN; Grease:6080 kN; D:600 mm; B:148 mm; d:400 mm; Dynamic (Cr):12 mm; Oil:457.510 kN; |
| SKF 351019C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic dynamic load rating C:77 kN; H2:33.337 mm; A1:77.787 mm; H:109.537 mm; A:58.737 mm; J min.:131.762 mm; s:25.4 mm; Mass bearing unit:3.65 kg; Attachment bolt diameter G:12.7 mm; J max.:152.4 mm; L:187.325 mm; Limiting speed:1600 r/min; da:44.45 mm; S:0.794 mm; H1:53.975 mm; B:73.025 mm; d2:68.659 mm; |
| NSK 350TFD4901 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil Speed Rating n2:25000 rpm; d:17.000 mm; B:10.00 mm; Basic Static Radial Load Rating Co:4250 N; Fillet Radius ra:0.30 mm; D:35.0000 mm; Basic Dynamic Radial Load Rating C:7610 N; Grease Speed Rating n1:19000 rpm; |
| 547584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Calculation factor (back-to-back, face-to-face) Y1:0.92; Basic dynamic load rating C:16.3 kN; Da max.:89 mm; D2:85.4 mm; Preload class C GC:870 N; Preload class A GA:150 N; Calculation factor (single, tandem) Y2:0.87; d2:70.6 mm; Db max.:90.8 mm; Calculation factor e:0.68; Calculation factor f:1.08; Calculation factor f2C:1.06; r3,4 min.:0.6 mm; Calculation factor f2A:1; d1:72.74 mm; Calculation factor fHC:1.01; |
| FAG 529086 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da min.:416 mm; Basic static load rating C0:7200 kN; Fatigue load limit Pu:600 kN; K:9 mm; Limiting speed:1100 r/min; Calculation factor kr:0.28; b:16.7 mm; Da max.:584 mm; B:200 mm; da max.:441 mm; r1,2 min.:5 mm; s max.:5 mm; Basic dynamic load rating C:3470 kN; D1 ≈:539 mm; D:600.19 mm; db min.:454 mm; d:400 mm; F:449 mm; Design variant/feature:NNU/CNW33; Reference speed:950 r/min; |
| 829234 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | A5:20.5 mm; R1:21 mm; L:95 mm; Db1:65 mm; A1:12 mm; s1:19.8 mm; Basic dynamic load rating C:14 kN; J7:19 mm; A3:3.2 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; Fatigue load limit Pu:0.335 kN; N:11.5 mm; Recommended tightening torque for grub screw:4 N·m; Thread grub screw G2:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.375 in; Da:74.6 mm; GN:1/4-28 SAE-LT; |