| FAG 509352 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | End plug (suffix Y):EPR 8; Housing:SAFS 215; Cap bolt:2 x 1/2-13 UNC; P150°:25.4 kN; Da:130 mm; Labyrinth ring (dc shaft position):LOR 46; H1:82.55 mm; A2:120.65 mm; Cap bolt recommended tightening torque:149.1 N·m; Labyrinth ring (db shaft position):LOR 79; da:75 mm; P180°:30.2 kN; R2:21.431 mm; PosiTrac Plus contact element (dc shaft position):B10724-44; A1:79.375 mm; h:28.575 mm; |
| 540295 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Basic Dynamic Radial Load Rating C:4030 N; d:15.000 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Accessories:Two Shields; Sealed Speed Rating n3:16000 rpm; Grease Speed Rating Open/Shielded n1:24000 rpm; Basic Static Radial Load Rating Co:2040 N; B:7.00 mm; D:28.0000 mm; |
| FAG 567356 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | R1:21 mm; Basic static load rating C0:11.2 kN; N:11.5 mm; L:83 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.375 in; T:42.2 mm; A5:22.5 mm; Db2:83 mm; Mass bearing unit:0.88 kg; Thread grub screw G2:1/4-28 UNF; Basic dynamic load rating C:19.5 kN; s1:22.2 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; N4:2 mm; Rα:45 °; B:38.1 mm; B4:5 mm; Hexagonal key size for grub screw N:3.175 mm; |
| 528974 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Da max.:104 mm; Db max.:105.8 mm; r3,4 min.:0.6 mm; Preload class B GB:610 N; d1:84.3 mm; D1:95.32 mm; d2:81.6 mm; Basic dynamic load rating C:22.5 kN; db min.:76 mm; Calculation factor f:1.09; Preload class C GC:1220 N; Calculation factor fHC:1; Fatigue load limit Pu:0.735 kN; D:110 mm; da min.:76 mm; Number of balls z:25; Basic static load rating C0:17.3 kN; Ball diameter Dw:9.525 mm; Static axial stiffness, preload class A:143 N/µm; |
| SKF 351175C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Dynamic Radial Load Rating C:21200 N; Fillet Radius ra:1.00 mm; d:25.000 mm; D:62.0000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; Oil Speed Rating n2:14000 rpm; Accessories:One Shield; Basic Static Radial Load Rating Co:10800 N; B:17.00 mm; Sealed Speed Rating n3:7500 rpm; Grease Speed Rating n1:11000 rpm; |
| NTN CRTD6404 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | D:115.0000 mm; Basic Dynamic Radial Load Rating C:61800 N; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:1.00 mm; d:75.000 mm; Oil Speed Rating n2:4900 rpm; Basic Static Radial Load Rating Co:75000 N; Fillet Radius rb:0.60 mm; B:40.00 mm; |
| NSK 460TFD6801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | ra max.:1.5 mm; Basic static load rating C0:3450 kN; Fatigue load limit Pu:43 kN; Minimum load factor A:62; Limiting speed:800 r/min; D1 ≈:852.5 mm; Mass bearing (including seat washer where applicable):34.5 kg; d:850 mm; Reference speed:560 r/min; d1 ≈:917.5 mm; r1,2 min.:1.5 mm; Basic dynamic load rating C:377 kN; H:53 mm; da min.:891 mm; D:920 mm; Da max.:879 mm; |
| FAG 530852 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Db:115 mm; B4:9 mm; Basic dynamic load rating C:29.6 kN; Recommended diameter for attachment bolts, inch G:0.625 in; Fatigue load limit Pu:0.98 kN; B:51.6 mm; Limiting speed:2200 r/min; d:49.213 mm; N:17 mm; H:197 mm; A1:21 mm; Basic static load rating C0:23.2 kN; Hexagonal key size for grub screw N:4.763 mm; Recommended tightening torque for grub screw:16.5 N·m; T:57.6 mm; Recommended diameter for attachment bolts, mm G:16 mm; |
| NTN CRTD3401 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Accessories:Two Shields; Basic Static Radial Load Rating Co:125000 N; D:150.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; d:70.000 mm; B:63.50 mm; Grease Speed Rating n1:2800 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; |
| 579704 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius ra:2.00 mm; Grease Speed Rating n1:8700 rpm; D:170.0000 mm; Basic Static Radial Load Rating Co:102000 N; Oil Speed Rating n2:13000 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:99500 N; B:28.00 mm; d:110.000 mm; |
| 57332 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Ca:77.8 mm; P150°:85.9 kN; Stabilizing ring:SR-28-0; PG:1/4 NPT; S:4.763 mm; Labyrinth ring:2 x LOR 123; Da:250 mm; End plug (suffix Y):EPR 27; Appropriate attachment bolt size G:1 in; da:127 mm; Pa:28.5 kN; P90°:149 kN; R1:87.313 mm; J max.:441.325 mm; Initial grease fill:481.95 g; P180°:103 kN; J1:85.725 mm; R2:38.1 mm; N1:28.575 mm; h:51.594 mm; |
| FAG 544025 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | da:79.375 mm; Cap bolt, SAE grade:8; h:38.1 mm; PG:1/8 NPT; P120°:53.4 kN; Housing:SAFS 518; P150°:48 kN; Bearing limiting speed:5300 r/min; P180°:58.7 kN; P90°:84.5 kN; Ca:49.809 mm; Mass pillow block:30.8 kg; Appropriate attachment bolt size G:0.75 in; Stabilizing ring:SR-18-15; A1:98.425 mm; H1:101.6 mm; Labyrinth ring:2 x LOR 189; Cap bolt:1/2-13 UNC; R2:27.781 mm; A2:149.225 mm; |
| SKF 350916D DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass bushing:0.31 kg; Permissible sliding velocity v max.:1 m/s; Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ max.:0.15; Tolerance shaft:f7 m/s; Coefficient of friction µ min.:0.08; d:90 mm; Specific static load factor K0:120 N/mm²; D:95 mm; Tolerance housing:H7 m/s; Permissible sliding velocity v min.:0 m/s; B:50 mm; |
| 528294 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | P180°:160 kN; L:711.2 mm; End plug (suffix Y):EPR 23; H2:79.375 mm; Pa:59.6 kN; h:57.15 mm; Initial grease fill:1672.65 g; Cap bolt recommended tightening torque:1735.4 N·m; Cap bolt, SAE grade:8; PosiTrac Plus contact element:2 x B10724-167; H:400.05 mm; A2:276.225 mm; P60°:416 kN; Da:339.999 mm; Stabilizing ring:2 x 36053-140; R1:120.65 mm; RG:1 NPT; R2:42.069 mm; Max. speed for PosiTrac Plus seal:725 r/min; |