| No. | Brand | H | d | A | S | D | s | e | G |
| 230.20.0600.013 Type 21/750. | Standard 5 | - | - | - | - | - | 55 mm | - | - |
| 162.25.0980.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R8-98N9 | Rotek | - | - | - | - | - | - | - | - |
| A22-105E2A | Rotek | - | 2 in | - | - | 3.6718 in | - | - | - |
| 162.25.1077.891.21.1503 | Standard 5 | - | 7.0000 in | - | - | - | - | - | - |
| 60.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.20.1006.991.21.1503 | Standard 5 | - | 30.226 mm | - | - | 68.956 mm | - | - | - |
| 62.25.0855.575.11.1403 | Standard 5 | - | - | - | - | 4.7343 in | - | - | - |
| 230.21.0775.013 Type 21/850. | Standard 5 | - | - | - | - | 150 mm | - | - | - |
| 231.20.0500.503 Type 21/650.1 | Standard 5 | - | - | - | 1.541 in | - | - | - | - |
| 3R6-63P9 | Rotek | - | - | - | - | - | - | - | - |
| 230.20.0900.503 Type 21/1050. | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0400.013 Type 21/520.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R8-98E9 | Rotek | - | 20 mm | - | - | 47 mm | - | - | - |
| 61.20.0544.500.01.1503 | Standard 5 | - | 1.5740 in | - | - | 3.1510 in | - | - | - |
| 11.20.0755.000.11.1504 | Standard 5 | - | - | 7 mm | - | 40.00 mm | - | - | - |
| A22-98P1 | Rotek | 113.00 mm | - | 90.00 mm | - | - | - | - | M12 |
| 280.30.0900.013 Type 110/1100. | Standard 5 | - | - | - | - | - | - | - | - |
| 3R16-197E2 | Rotek | - | - | - | - | - | - | - | M24 |
| 230.21.0475.013 Type 21/520. | Standard 5 | - | 7.5 in | - | - | - | - | - | - |
| 60.25.1055.575.11.1403 | Standard 5 | - | 45 mm | - | - | 85 mm | - | - | - |
| 161.20.0450.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.20.0710.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R10-82E3C | Rotek | - | 40 mm | - | - | - | - | - | - |
| 161.25.0886.891.21.1503 | Standard 5 | - | 140 mm | - | - | - | - | - | - |
| 61.25.0855.500.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0875.013 Type 21/950.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.21.0575.013 Type 21/650. | Standard 5 | - | - | 0.1970 in | - | 1.4960 in | - | - | - |
| 162.20.0710.891.21.1503 | Standard 5 | - | 25.400 mm | - | - | - | - | - | - |
| 61.20.0744.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| S24-158E1 Rotek Slewing Ring Bearings | R - Cone Backface To Clear Radius1:2.540 mm; e - ISO Factor8:0.43; C0 - Static Radial Rating:617000 N; Db - Cup Backface Backing Diameter:183.9 mm; B:45 mm; Aa - Cage-Cone Backface Clearance:3.3 mm; Bearing Weight:0.000 Kg; C1 - Dynamic Radial Rating (1 million revolutions)5:386000 N; C90 - Dynamic Radial Rating (90 million revolutions)4:100000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:74600 N; |
| 3R13-122N1B Rotek Slewing Ring Bearings | C0 - Static Load:52000 lb; Engineering Group:Mounted Bearing; Dimension G:2.900 in; Shaft Tolerance:0.0015 in; Grease Lubrication - T Seal:2600 rpm; C - Dynamic Load (Basic):47800 lb; Housing Style:Two-Bolt Pillow Bloc; Bearing Number:22214; Grease Lubrication - M/N Seal:1700 rpm; Dimension B:5.8 in; Grease Lubrication - B/C/O Seal:1400 rpm; e - Geometry Factor:0.23; Pre Install Clearance Max:0.0037 in; |
| 92.20.1006.991.21.1503 Standard 5 Slewing Ring Bearings | Cup Part Number:14274A; G1 - Heat Generation Factor (Roller-Raceway):18; Da - Cup Frontface Backing Diameter:63.00 mm; Cg - Geometry Factor:0.0668; B:19.845 mm; C0 - Static Radial Rating:13900 lbf; Cage Type:Stamped Steel; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; db - Cone Backface Backing Diameter:37.08 mm; Y - ISO Factor9:1.57; K - Factor7:1.53; Design Units:Imperial; Cone Part Number:14116W; |
| 230.21.0875.013 Type 21/950. Standard 5 Slewing Ring Bearings | Dimension S:3.62 in; Y1 - Geometry Factor:2.62; Eng Internal Radial Clearance - Max:0.0057; Dimension L Exp:3.96 in; Dimension L Fix:3.88 in; Oil Lubrication - M/N Seal:700 rpm; Shaft Size :5 in; Dimension J (Bolt Size):1.125 in; Dimension M:2.37 in; Y2 - Geometry Factor:3.90; Weight:115 lb; Grease Lubrication - M/N Seal:700 rpm; Dimension N:5.450 in; e - Geometry Factor:0.26; Dimension E:7.000 in; |
| 3R10-82E3C Rotek Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:1.5 mm; Design Units:Imperial; K - Factor7:1.45; Cg - Geometry Factor:0.0709; Ab - Cage-Cone Frontface Clearance:1.8 mm; Db - Cup Backface Backing Diameter:69.09 mm; a - Effective Center Location3:-4.8 mm; da - Cone Frontface Backing Diameter:44.96 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3020 lbf; Cone Part Number:28158; e - ISO Factor8:0.4; db - Cone Backface Backing Diameter:47.5 mm; |
| 3R8-122N1A Rotek Slewing Ring Bearings | Dimension B:0.906 in; Dimension D:0.188 in; Eng Internal Radial Clearance - Max:0.0037; Oil Lubrication - M/N Seal:1800 rpm; Weight:12 lb; Oil Lubrication - B/C/O Seal:1500 rpm; Dimension L Exp:3.46 in; Float:0.083 in; Dimension A:0.530 in; Oil Lubrication - T Seal:3200 rpm; Pre Install Clearance Min:0.0030 in; Shaft Size :55 mm; Pre Install Clearance Max:0.0037 in; e - Geometry Factor:0.24; |
| 232.20.0600.013 Type 21/750.2 Standard 5 Slewing Ring Bearings | Oil Lubrication - M/N Seal:1200 rpm; Oil Lubrication - B/C/O Seal:900 rpm; Shaft Size Type:Imperial; Dimension RAA:0.95 in; UPC Code:0883450019903; Dimension H:1.50 in; Dimension C:6.00 in; Shaft Size :4 in; Full Timken Part Number:QAAF20A400SB; Eng Internal Radial Clearance - Max:0.0047; Grease Lubrication - B/C/O Seal:900 rpm; Dimension N:4.060 in; Grease Lubrication - T Seal:1600 rpm; |
| 61.25.0980.891.21.1503 Standard 5 Slewing Ring Bearings | Dimension T:10.2 in; Cor - Static Load Rating:28551 lbf; Maximum Speed:4350 rpm; Dimension V:0.1 in; Dimension H:2.6 in; Dimension P:0.6 in; Note:This product line wa; Dimension L:4.8 in; Bearing - Housing - Seal:MSE111BXHKPS; Dimension R:8.6 in; Shaft Size:1-11/16 in; Support Type:Round Flange; Cr - Dynamic Load Rating:27202 lbf; Bearing Number:MSE111BX; Bearing Type:Split Cylindrical Ex; Bolt Size:4 x M12; |
| 62.20.0630.000.11.1503 Standard 5 Slewing Ring Bearings | G1 - Heat Generation Factor (Roller-Raceway):413; B - Cone Width:1.9687 in; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius3:0.14 in; C1 - Dynamic Radial Rating (1 million revolutions)6:90300 lbf; K - Factor8:1.66; da - Cone Frontface Backing Diameter:6.5 in; Cg - Geometry Factor:0.125; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:14100 lbf; Aa - Cage-Cone Backface Clearance:0.31 in; |
| 60.25.1055.575.11.1403 Standard 5 Slewing Ring Bearings | da - Inner Ring Backing Diameter:52.300 mm; R - Inner Ring To Clear Radius2:1.0 mm; Full Timken Part Number:2MMC209WICRDUH; D:85 mm; d:45 mm; C0 - Static Radial Rating:25600 N; Design Units:METRIC; do - Ball Diameter:12.700 mm; Cage Type:CR - Phenolic Outer; Precision Class:ISO P4S (ABEC 7/9); Da - Outer Ring Backing Diameter:78.200 mm; Contact Angle:15 º; Bearing Width:19.0 mm; Limiting Speed (Oil):42000 rpm; |
| 61.20.0560.101.21.1503 Standard 5 Slewing Ring Bearings | C - Double Cup Width:3.3750 in; K - Factor3:1.7; Design Units:Imperial; Cg - Geometry Factor7:0.122; Y - ISO Factor1:1.74; Y1 - ISO Factor5:1.96; Da - Cup Frontface Backing Diameter:7.59 in; e - ISO Factor4:0.34; D:8.7500 in; r - Cup Frontface To Clear Radius2:0.06 in; Y2 - ISO Factor6:2.92; Series:67300; |
| 60.20.0644.575.01.1403 Standard 5 Slewing Ring Bearings | Limiting Speed (Grease):25500 rpm; Bearing Width:13 mm; Ball Type:STEEL; r - Outer Ring To Clear Radius3:1.0 mm; d:30 mm; Ce - Dynamic Radial Rating1:16800 N; R - Inner Ring To Clear Radius2:1.0 mm; do - Ball Diameter:7.143750 mm; C0 - Static Radial Rating:10300 N; Bearing Weight:0.113 Kg; Contact Angle:15 º; Cage Type:CR - Phenolic Outer; Limiting Speed (Oil):51000 rpm; D:55.000 mm; Design Units:METRIC; |
| A19-150P1 Rotek Slewing Ring Bearings | R - Cone Backface To Clear Radius1:0.14 in; Cage Type:Stamped Steel; K - Factor7:1.45; Y1 - ISO Factor9:1.68; e - ISO Factor8:0.4; Series:13600; Cg - Geometry Factor12:0.0713; G1 - Heat Generation Factor (Roller-Raceway)11:20.7; Da - Cup Frontface Backing Diameter:2.60 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:6820 lbf; Ab - Cage-Cone Frontface Clearance:0.05 in; Y2 - ISO Factor10:2.5; |
| 161.16.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing - Housing - Seal:LSM230BXH; Shaft Size:230 mm; Bearing Number:LSM230BX; Maximum Speed:930 rpm; Note:This product line wa; Dimension K:5.5 in; Cor - Static Load Rating:262577 lbf; Dimension M:8.5 in; Dimension L:25.0 in; Dimension J:18.1 in; Bolt Size:4 x M30; Housing Width:7.0 in; Dimension H1:1.6 in; Bearing Type:Split Cylindrical Ex; Support Type:Four-Bolt Plummer Bl; |