| No. | Brand | H | d | A | S | D | s | e | G |
| 60.20.0744.500.01.1503 | Standard 5 | - | - | - | - | 26.0000 in | - | - | - |
| 62.30.1120.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0675.013 Type 21/750.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0450.001.21.1503 | Standard 5 | 0.604 in | - | - | - | 2.385 in | - | - | 1.355 in |
| 3R16-197N1 | Rotek | - | - | - | - | - | - | - | - |
| 60.20.0644.575.01.1403 | Standard 5 | - | 30 mm | - | - | 55.000 mm | - | - | - |
| 162.16.0630.890.11.1503 | Standard 5 | - | 1.7500 in | - | - | 3.7500 in | - | - | - |
| 232.20.0400.013 Type 21/520.2 | Standard 5 | - | - | - | - | - | - | 4.2 mm | Tr300x4 |
| 250.15.0300.013 Type 13/4 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0400.100.11.1503 | Standard 5 | - | 165.1 mm | - | - | 288.925 mm | - | - | - |
| 62.20.0944.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0700.503 Type 21/850.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0844.575.01.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.25.0886.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.20.1006.990.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.20.0710.890.11.1503 | Standard 5 | - | 41.275 mm | - | - | - | - | - | - |
| 282.30.1075.013 Type 110/1200.2 | Standard 5 | - | - | 0.5900 in | - | 3.0710 in | - | - | - |
| 231.20.0600.013 Type 21/750.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 250.15.0475.013 Type 13/5 | Standard 5 | 0.104 in | - | - | - | 0.510 in | - | - | 0.240 in |
| 62.20.0744.575.01.1403 | Standard 5 | - | 45.000 mm | - | - | 95.000 mm | - | - | - |
| 161.20.0710.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R16-220E1 | Rotek | - | 2 in | - | - | 4.6250 in | - | - | - |
| 62.20.0400.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0475.013 Type 21/520.2 | Standard 5 | - | 38.1 mm | - | - | - | - | - | - |
| 3R16-102P5 | Rotek | - | - | - | - | 2.7170 in | - | - | - |
| 161.25.0886.891.21.1503 | Standard 5 | - | 140 mm | - | - | - | - | - | - |
| 62.25.1077.308.11.1504 | Standard 5 | - | 95 mm | - | - | 200 mm | - | - | - |
| A16-152E2 | Rotek | - | 17 mm | - | - | 35 mm | - | - | - |
| 11.20.0971.001.21.1504 | Standard 5 | - | - | - | - | 14 in | - | - | - |
| 232.20.0600.503 Type 21/750.2 | Standard 5 | - | 22.225 mm | - | - | - | - | - | - |
| 3R10-125P1B Rotek Slewing Ring Bearings | e - ISO Factor8:0.38; D:2.7170 in; Series:14000; Y2 - ISO Factor10:2.63; Aa - Cage-Cone Backface Clearance:0 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:5540 lbf; G2 - Heat Generation Factor (Rib-Roller End):9.4; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2080 lbf; G1 - Heat Generation Factor (Roller-Raceway)11:18; r - Cup Backface To Clear Radius2:0.090 in; B - Double Cone Width:1.5426 in; |
| 250.14.0400.013 Type 13/5 Standard 5 Slewing Ring Bearings | Shaft Size:10.75 in; Bearing Number:LSE1012BR; Dimension L:8.9 in; Bearing Type:Split Cylindrical Re; Seal Type:High Temperature Pac; Dimension H:4.9 in; Bearing UPC:013992025302; Note:This product line wa; Cr - Dynamic Load Rating:190638 lbf; Series Type:Light Series; Dimension N:19.875 in; Bearing - Housing - Seal:LSE1012BRHHTPS; Dimension T:26.0 in; Maximum Speed:730 rpm; Bolt Size:4 x M30; Dimension P:1.5 in; |
| 3R10-82E3C Rotek Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:1.5 mm; Design Units:Imperial; K - Factor7:1.45; Cg - Geometry Factor:0.0709; Ab - Cage-Cone Frontface Clearance:1.8 mm; Db - Cup Backface Backing Diameter:69.09 mm; a - Effective Center Location3:-4.8 mm; da - Cone Frontface Backing Diameter:44.96 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:3020 lbf; Cone Part Number:28158; e - ISO Factor8:0.4; db - Cone Backface Backing Diameter:47.5 mm; |
| A22-105E2A Rotek Slewing Ring Bearings | Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway)11:49.9; r - Cup Frontface To Clear Radius2:0.03 in; B - Cone Width:1.1930 in; d:2 in; G2 - Heat Generation Factor (Rib-Roller End):14.5; e - ISO Factor8:0.34; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:12400 lbf; Aa - Cage-Cone Backface Clearance:0.06 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:7120 lbf; |
| A24-119E11A Rotek Slewing Ring Bearings | Weight:0.50 lb; Static Load Rating:6570 lbf; Sub Series:YAE..RRB; Shaft Size d:2.165 in; Set Screw Size:M10x1.5; Angle between Set Screws:90 º; Bore Type:Cylindrical bore; Dimension S1:32 mm; Dynamic Load Rating:10800 lbf; Lubrication Type:Non-Relubricatable; Outside Ring Width C:24.000 mm; Outside Diameter D:3.937 in; Seal Type:Narrow Shroud; Bearing Type:Ball Bearing; Center of Bearing from End S:14.6 mm; |
| 91.20.1006.991.21.1503 Standard 5 Slewing Ring Bearings | Bearing Weight:0.30 Kg; B - Cone Width:20.638 mm; d:28.575 mm; da - Cone Frontface Backing Diameter:34.04 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3490 lbf; B:20.638 mm; D:63.500 mm; R - Cone Backface To Clear Radius1:0.760 mm; Cage Type:Stamped Steel; Y - ISO Factor9:1.71; Cup Part Number:15250; K - Factor7:1.67; a - Effective Center Location3:-5.8 mm; Cg - Geometry Factor:0.0606; |
| 231.20.0600.503 Type 21/750.1 Standard 5 Slewing Ring Bearings | Inside Ring Width B:49.20 mm; Inside Ring Outside Diameter:2.280 in; Housing Style:Two-Bolt Flange; Dimension E:2.142 in; Dynamic Load Rating:8160 lbf; Weight:5.320 lb; Center of Bearing from Bearing End S:24.2 mm; Seal Type:Shroud Seal; Shaft Size d:1 1/2 in; Total Height L:111.1 mm; Total Length H:179.4 mm; Flange Thickness A1:12.70 mm; Bearing Type:Ball Bearing; Bolt Hole Size N:13.1 mm; Series:Medium-Duty; |
| 250.15.0375.013 Type 13/4 Standard 5 Slewing Ring Bearings | Cg - Geometry Factor:0.102; C1 - Dynamic Radial Rating (1 million revolutions)6:269000 N; R - Cone Backface To Clear Radius3:2.540 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; C0 - Static Radial Rating:339000 N; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:105000 lbf; K - Factor8:1.31; d:105.000 mm; G2 - Heat Generation Factor (Rib-Roller End):50.7; Ab - Cage-Cone Frontface Clearance:3.3 mm; |
| 3R10-117N3D Rotek Slewing Ring Bearings | Cg - Geometry Factor3:0.3527; da - Inner Ring Backing Diameter:730.000 mm; Reference Thermal Speed Rating (Oil)2:230; R - Inner Ring To Clear Radius4:6.000 mm; Design Units:METRIC; Type:NU; Bearing Weight:468.800 Kg; C - Dynamic Radial Rating1:6170000 N; r - Outer Ring To Clear Radius5:6.000 mm; B - Outer Ring Width:180.000 mm; d:670.000 mm; C - Inner Ring Width:180.000 mm; Da - Outer Ring Backing Diameter:0.000 mm; |
| 60.45.0805.001.11.1504 Standard 5 Slewing Ring Bearings | Bn:58 mm; D3:460 mm; Tapped Hole Threads:M12x1.75; D4:420 mm; Thread D11:Tr360x5; s:28 mm; i:21 mm; Dp:392 mm; T:15 mm; Suitable Lockplate No.:MS3172; Weight:25.1 Kg; |
| A18-89E1 Rotek Slewing Ring Bearings | Radius Rs min:2.100 mm; Grease Reference Speed:5700 rpm; Oil Reference Speed:8200 rpm; Weight:2.5 Kg; Features:O.D. Groove; C0r - Static Load Rating:68 kN; Clearance:C0 (Normal); Cr - Dynamic Load Rating:104.1 kN; Bore Size d:70 mm; Outside Diameter D:150.000 mm; Outside Ring Width B:35.000 mm; |
| 60.35.0680.000.11.1503 Standard 5 Slewing Ring Bearings | Dimension J2 :22-1/2 in; Cr - Dynamic Load Rating:136576 lbf; Seal Type:High Temperature Pac; Bearing Number:LSE708BR; Support Type:Four-Bolt Plummer Bl; Dimension K :5 in; Cor - Static Load Rating:222676 lbf; Dimension H2:17.7 in; Bolt Size:4 x 1-1/4; Shaft Size:7.5 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension L :29-3/8 in; Housing Width:6.8 in; Dimension M :8 in; |
| 162.20.0630.891.21.1503 Standard 5 Slewing Ring Bearings | Suitable Lockplate No.:MS 30/850; D3:980 mm; Thread D11:Tr850x7; Bn:90 mm; T:25 mm; i:40 mm; Tapped Hole Threads:M20; D4:925 mm; Dp:887 mm; Weight:118.00 Kg; s:60 mm; |
| 61.20.0560.100.11.1503 Standard 5 Slewing Ring Bearings | Aa - Cage-Cone Backface Clearance:0.18 in; K - Factor8:0.79; C0 - Static Radial Rating:39400 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:37100 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:16800 lbf; Ab - Cage-Cone Frontface Clearance:0.2 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12100 lbf; Cone Part Number:72188; G2 - Heat Generation Factor (Rib-Roller End):14.1; |