| No. | Brand | H | d | A | S | D | s | e | G |
| A16-152E2 | Rotek | - | 17 mm | - | - | 35 mm | - | - | - |
| 161.25.0980.890.11.1503 | Standard 5 | - | 150 mm | - | - | 254.000 mm | - | - | - |
| 230.21.0575.013 Type 21/650. | Standard 5 | - | - | 0.1970 in | - | 1.4960 in | - | - | - |
| 60.25.0855.575.11.1403 | Standard 5 | 9.5625 in | - | 4.9375 in | - | 2.00 in | - | - | - |
| 3R10-125P1B | Rotek | - | 1.2500 in | - | - | 2.7170 in | - | - | - |
| 230.20.0600.503 Type 21/750. | Standard 5 | - | 431.800 mm | - | - | - | - | - | - |
| A16-79P1A | Rotek | - | - | - | - | - | - | - | - |
| 3R6-79E9 | Rotek | - | - | - | - | - | - | - | - |
| 3R8-98N9 | Rotek | - | - | - | - | - | - | - | - |
| 282.30.1075.013 Type 110/1200.2 | Standard 5 | - | - | 0.5900 in | - | 3.0710 in | - | - | - |
| 281.30.0975.013 Type 110/1100.1 | Standard 5 | - | - | - | - | - | - | - | - |
| 60.35.0680.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.0764.103.11.1504 | Standard 5 | - | - | 85.00 mm | - | - | - | - | M12 |
| 162.16.0450.891.21.1503 | Standard 5 | - | - | - | 0.666 in | - | - | - | - |
| 282.30.1000.013 Type 110/1200.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.20.0710.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 230.21.0475.013 Type 21/520. | Standard 5 | - | 7.5 in | - | - | - | - | - | - |
| A20-95N4 | Rotek | - | 25 mm | - | - | 52 mm | - | - | - |
| 61.20.0630.101.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 3R16-197E2 | Rotek | - | - | - | - | - | - | - | M24 |
| A22-98P1 | Rotek | 113.00 mm | - | 90.00 mm | - | - | - | - | M12 |
| 282.30.0900.013 Type 110/1100.2 | Standard 5 | - | - | - | - | 10.0000 in | - | - | - |
| 60.25.0475.000.11.1504 | Standard 5 | - | 120 mm | - | - | 165 mm | - | - | - |
| 280.30.0975.013 Type 110/1100. | Standard 5 | - | - | - | - | - | - | - | - |
| 232.20.0400.503 Type 21/520.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.20.0500.013 Type 21/650.1 | Standard 5 | - | - | 7 mm | - | 41.00 mm | - | - | - |
| 161.25.0886.891.21.1503 | Standard 5 | - | 140 mm | - | - | - | - | - | - |
| 3R10-98P9 | Rotek | - | 10.875 in | - | - | - | - | - | - |
| 162.20.0450.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| A10-110P2D Rotek Slewing Ring Bearings | Weight:5.99 Kg; Appropriate Hydraulic Nut:HMV34; Locknut:KML34; Lockwasher and Lockplates:MBL34; Thread G:M170x3; L:101.00 mm; C:28.5 mm; D3:200 mm; d1:150.00 mm; |
| 231.20.0500.013 Type 21/650.1 Standard 5 Slewing Ring Bearings | E1:171 mm; Piston Length of Travel:6 mm; Piston Area:9500 mm²; C:245.0 mm; D:41.00 mm; A:7 mm; E:215 mm; Threads B:M170x3; Assembly Weight:8.400 Kg; |
| A22-166N1 Rotek Slewing Ring Bearings | B:0.5310 in; Oil Holes in Retainer:No; R - Fillet Radius Shaft (Max):0.03 in; D - Bearing O.D.:1.7700 in; d - Bore Diameter:0.9380 in; d1 - Bore Diameter:0.9470 in; Bearing Type:Thrust Tapered Rolle; Steering Pivot Rating:2690 lbf; |
| 61.25.0980.107.11.1504 Standard 5 Slewing Ring Bearings | R - Cone Backface To Clear Radius3:0.14 in; Ab - Cage-Cone Frontface Clearance:0.11 in; Aa - Cage-Cone Backface Clearance:0.2 in; G2 - Heat Generation Factor (Rib-Roller End):45.3; d:4.5000 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:14100 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:16000 lbf; B - Cone Width:1.6250 in; C0 - Static Radial Rating:94200 lbf; db - Cone Backface Backing Diameter:5.16 in; |
| 62.20.0400.001.21.1503 Standard 5 Slewing Ring Bearings | Dimension H:5.2 in; Cor - Static Load Rating:374307 lbf; Note:This product line wa; Dimension T:28.0 in; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992095879; Dimension N:21.250 in; Series Type:Light Series; Dimension L:9.5 in; Maximum Speed:650 rpm; Seal Type:Kevlar Packing Seal; Dimension P:1.5 in; Dimension V:0.1 in; Cr - Dynamic Load Rating:208848 lbf; Shaft Size:12 in; Bearing UPC:013992025616; |
| 61.25.0764.106.21.1504 Standard 5 Slewing Ring Bearings | D:140 mm; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; Ball Type:STEEL; Limiting Speed (Oil):19000 rpm; Design Units:METRIC; Limiting Speed (Grease):9500 rpm; Bearing Weight:2.101 Kg; Ce - Dynamic Radial Rating1:119700 N; do - Ball Diameter:23.81250 mm; da - Inner Ring Backing Diameter:79.800 mm; C0 - Static Radial Rating:77400 N; Bearing Width:33 mm; d:65 mm; Da - Outer Ring Backing Diameter:126.800 mm; |
| 60.20.0414.500.01.1503 Standard 5 Slewing Ring Bearings | Y - ISO Factor3:1.61; Design Units:Imperial; Da - Cup Frontface Backing Diameter:7.87 in; Series:L432300; D:8.0938 in; Cup Part Number:KL432310; C - Cup Width:0.7188 in; Db - Cup Backface Backing Diameter:7.68 in; e - ISO Factor2:0.37; r - Cup Backface To Clear Radius1:0.06 in; Cg - Geometry Factor:0.152; |
| 61.25.0855.575.11.1403 Standard 5 Slewing Ring Bearings | Cone Part Number:99575; Series:99000; B - Cone Width:66.675 mm; B:66.675 mm; Cup Part Number:99100; a - Effective Center Location3:-12.2 mm; K - Factor7:1.43; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26800 lbf; Cage Type:Stamped Steel; Design Units:Imperial; D:254.000 mm; da - Cone Frontface Backing Diameter:162.05 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:148000 lbf; C0 - Static Radial Rating:231000 lbf; |
| 62.25.0886.801.21.1504 Standard 5 Slewing Ring Bearings | SNW/SNP Assembly Weight:30.6 lb; Lockwasher and Lockplates:W-40; Taper:1:12; Sleeve:S-140 x 7 1/4; S:1.344 in; Bearing Number:22340K, 23240K; D1:9.849 in; Series:223K and 232K; Diameter d :7 1/4 in; B2:7.085 in; Tolerance1:-0.005 in; Locknut:AN-40; |
| 61.20.0630.101.21.1503 Standard 5 Slewing Ring Bearings | Outer-Ring Set:257RYS1683; Width B:218.000 mm; Backing Housing Diameter Ds:309.2 mm; Dynamic Load Rating C11:4160 kN; Bore d:220 mm; Number of Lubrication Holes:8; O.D. D:340.000 mm; Chamfer rsmin:3.00 mm; Lubrication Hole Diameter h:5.0 mm; Inner-Ring Set:220ARVS1683; Backing Shaft Diameter ds:251.0 mm; Weight:166.300 lb; Width C:218.000 mm; Lubrication Groove g:10.0 mm; Type:RY-1; Chamfer r1smin2:3.0 mm; |
| 280.30.0900.013 Type 110/1100. Standard 5 Slewing Ring Bearings | Dimension H2:25.8 in; Housing Width:11.8 in; Dimension M:10.5 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension J:25.0 in; Shipping Weight:1494 lb; Bolt Size:4 x M36; Cor - Static Load Rating:513688 lbf; Ca - Axial Load Rating:22391 lbf; Maximum Speed:880 rpm; Seal Type:Aluminium Triple Lab; Series Type:Heavy Series; Cr - Dynamic Load Rating:359020 lbf; Bearing Type:Split Cylindrical Re; |
| S14-90E1 Rotek Slewing Ring Bearings | Dimension B:6.59 in; Dimension KA:1.25 in; Y1 - Geometry Factor:3.14; Weight:28 lb; Shaft Size Type:Imperial; Dimension M:2.37 in; Shaft Size :3 in; Housing Style:Two-Bolt Pillow Bloc; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Dimension SA:3.62 in; Dimension J (Bolt Size):0.750 in; Dimension G:3.0000 in; Dimension D Min:7.70 in; Dimension F:10.44 in; Pre Install Clearance Max:0.0031 in; |
| 12.18.0748.002.21.1504 Standard 5 Slewing Ring Bearings | Dimension BC:9.45 in; Dimension D:4.750 in; C0 - Static Load:31900 lb; Dimension F:5.31 in; Dimension A:11.12 in; Grease Lubrication - T Seal:3200 rpm; Grease Lubrication - M/N Seal:2200 rpm; Housing Style:Four-Bolt Square Fla; Full Timken Part Number:99999B; Oil Lubrication - M/N Seal:2200 rpm; Dimension N:2.560 in; Dimension SVV:4.49 in; Eng Internal Radial Clearance - Max:0.0037; Oil Lubrication - B/C/O Seal:1800 rpm; |
| 162.16.0450.891.21.1503 Standard 5 Slewing Ring Bearings | Locknut:AN-15; D1:3.880 in; SNW/SNP Assembly Weight:2.32 lb; Lockwasher and Lockplates:W-15; Series:223K and 232K; Bearing Number:22315K; Sleeve:S-115 x 2 1/2; Tolerance1:-0.004 in; Diameter d :2 1/2 in; S:0.666 in; B2:3.074 in; Taper:1:12; |