| No. | Brand | H | d | A | S | D | s | e | G |
| 162.25.1077.891.21.1503 | Standard 5 | - | 7.0000 in | - | - | - | - | - | - |
| 232.20.0500.013 Type 21/650.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 232.21.0475.013 Type 21/520.2 | Standard 5 | - | 38.1 mm | - | - | - | - | - | - |
| 162.20.0630.891.21.1503 | Standard 5 | - | - | - | - | - | 60 mm | - | - |
| R11-79E3 | Rotek | - | - | - | - | - | - | - | - |
| 161.25.0886.890.11.1503 | Standard 5 | - | - | 0.4330 in | - | 2.2830 in | - | - | - |
| 61.20.0944.575.01.1403 | Standard 5 | - | - | - | - | 3.4843 in | - | - | - |
| 230.21.0475.013 Type 21/520. | Standard 5 | - | 7.5 in | - | - | - | - | - | - |
| 60.25.0955.500.11.1503 | Standard 5 | - | 260.350 mm | - | - | 419.100 mm | - | - | - |
| 60.20.0644.575.01.1403 | Standard 5 | - | 30 mm | - | - | 55.000 mm | - | - | - |
| 162.16.0400.890.11.1503 | Standard 5 | - | 0.7500 in | - | - | - | - | - | - |
| A14-89P1 | Rotek | - | 9.0000 in | - | - | - | - | - | - |
| 162.25.0764.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 231.21.0975.013 Type 21/1050.1 | Standard 5 | - | - | - | - | 3.1875 in | - | - | - |
| 12.18.0748.000.11.1504 | Standard 5 | - | 7.0000 in | - | - | - | - | - | - |
| 3R10-98N1B | Rotek | 30.5000 in | - | 15.5000 in | - | 5.5000 in | - | - | - |
| 61.20.0944.500.01.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.20.0400.101.21.1503 | Standard 5 | - | 120 mm | - | - | 215 mm | - | - | - |
| A24-107N1 | Rotek | - | 460.000 mm | - | - | 760.000 mm | - | - | - |
| 62.25.1055.500.11.1503 | Standard 5 | - | 7.5 in | - | - | - | - | - | - |
| 3R10-117N3D | Rotek | - | 670.000 mm | - | - | 980.000 mm | - | - | - |
| 230.20.0800.503 Type 21/950. | Standard 5 | - | - | - | - | - | - | - | - |
| 230.20.0700.013 Type 21/850. | Standard 5 | - | 29.9183 in | - | - | - | - | - | - |
| 3R10-111N2F | Rotek | - | - | - | - | - | - | - | - |
| 281.30.1075.013 Type 110/1200.1 | Standard 5 | - | 530.000 mm | - | - | 780.000 mm | - | - | - |
| 231.20.0800.503 Type 21/950.1 | Standard 5 | - | 50.000 mm | - | - | - | - | - | - |
| 62.30.1120.001.21.1504 | Standard 5 | - | - | - | - | 6.0000 in | - | - | - |
| 231.21.0675.013 Type 21/750.1 | Standard 5 | - | 8.0625 in | - | - | - | - | - | - |
| 161.16.0400.891.21.1503 Standard 5 Slewing Ring Bearings | Dimension H1:1.6 in; Series Type:Light Series; Dimension M:7.0 in; Weight:204 lb; Bearing Number:LSM135BX; Bearing Type:Split Cylindrical Ex; Bolt Size:4 x M24; Dimension K:4.7 in; Housing Width:6.5 in; Maximum Speed:1570 rpm; Note:This product line wa; Bearing - Housing - Seal:LSM135BXH; Dimension H2:15.9 in; Dimension H:7.126 in; Dimension L:22.0 in; Shaft Size:135 mm; Support Type:Four-Bolt Plummer Bl; |
| 161.16.0450.891.21.1503 Standard 5 Slewing Ring Bearings | H1:112.0 mm; L:380.00 mm; UPC Code:999999999; A2:178 mm; Seal:LO617; A1:110 mm; Max Oil Speed:3500; Bearing:22317K; N1:32.00 mm; C1 Dynamic Load Rating:569; A:160.00 mm; H:218 mm; N:26 mm; Shaft Diameter d:75 mm; Lockwasher:MB17; Bolt Qty:2; Locating Rings (width x OD):SR180X5; Max Grease Speed:3000; Cage Type:EJ; Locknut:KM17; |
| 162.20.0710.890.11.1503 Standard 5 Slewing Ring Bearings | Bearing Type:Split Cylindrical Re; Bearing - Housing - Seal:MSM60BRH; Dimension J:10.6 in; Cor - Static Load Rating:42714 lbf; Dimension H2:8.2 in; Housing Width:4.9 in; Note:This product line wa; Dimension M:3.0 in; Series Type:Medium Series; Maximum Speed:3680 rpm; Shaft Size:60 mm; Dimension L:13.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Number:MSM60BR; Weight:47 lb; Dimension H1:1.5 in; |
| 62.20.0630.001.21.1503 Standard 5 Slewing Ring Bearings | Design Units:Imperial; r - Cup Frontface To Clear Radius2:0.06 in; Y2 - ISO Factor6:2.57; e - ISO Factor4:0.39; K - Factor3:1.49; C - Double Cup Width:5.0000 in; Series:526000; Cg - Geometry Factor7:0.179; Y1 - ISO Factor5:1.73; Da - Cup Frontface Backing Diameter:17.91 in; D:19.0000 in; Y - ISO Factor1:1.54; |
| 162.16.0560.890.11.1503 Standard 5 Slewing Ring Bearings | Taper:1:12; S:3.766 in; Series:230K; D1:36.255 in; Sleeve:S-30/800; Diameter d :29 7/16 in; B2:14.408 in; Bearing Number:230/800K; Tolerance1:-0.008 in; Locknut:N-800; Lockwasher and Lockplates:P-800; |
| 61.20.0844.500.01.1503 Standard 5 Slewing Ring Bearings | Dimension RAA:0.87 in; Y2 - Geometry Factor:4.67; Grease Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - T Seal:2400 rpm; Pre Install Clearance Min:0.0020 in; Pre Install Clearance Max:0.0031 in; Dimension A:3.74 in; Dimension D Max:10.98 in; Housing Style:Two-Bolt Pillow Bloc; Engineering Group:Mounted Bearing; Dimension H:1.34 in; Grease Lubrication - M/N Seal:1600 rpm; Dimension D Min:9.49 in; |
| 60.20.0644.575.01.1403 Standard 5 Slewing Ring Bearings | Limiting Speed (Grease):25500 rpm; Bearing Width:13 mm; Ball Type:STEEL; r - Outer Ring To Clear Radius3:1.0 mm; d:30 mm; Ce - Dynamic Radial Rating1:16800 N; R - Inner Ring To Clear Radius2:1.0 mm; do - Ball Diameter:7.143750 mm; C0 - Static Radial Rating:10300 N; Bearing Weight:0.113 Kg; Contact Angle:15 º; Cage Type:CR - Phenolic Outer; Limiting Speed (Oil):51000 rpm; D:55.000 mm; Design Units:METRIC; |
| 60.20.0744.575.01.1403 Standard 5 Slewing Ring Bearings | Note:This product line wa; Series Type:Light Series; Dimension H:80 mm; Cor - Static Load Rating:25853 lbf; Dimension L:275 mm; Dimension M:70 mm; Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:2-3/16 in; Bolt Size:2 x M16; Bearing Type:Split Cylindrical Ex; Dimension H2:180 mm; Dimension J:234 mm; Seal Type:Aluminium Triple Lab; Support Type:Two-Bolt Plummer Blo; Cr - Dynamic Load Rating:23155 lbf; |
| 60.20.0844.500.01.1503 Standard 5 Slewing Ring Bearings | Cg - Geometry Factor11:0.0984; Design Units:Imperial; Y1 - ISO Factor9:1.68; D:4.3307 in; db - Cone Backface Backing Diameter:3.07 in; B - Cone Width:1.4310 in; Da - Cup Frontface Backing Diameter:4.12 in; r - Cup Frontface To Clear Radius2:0.03 in; e - ISO Factor8:0.4; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10000 lbf; K - Factor7:1.45; Series:395; Y2 - ISO Factor10:2.5; |
| 60.20.0944.575.01.1403 Standard 5 Slewing Ring Bearings | Bearing - Housing - Seal UPC:013992086013; Dimension V:0.1 in; Dimension T:21.0 in; Cor - Static Load Rating:232453 lbf; Cr - Dynamic Load Rating:164111 lbf; Bolt Size:4 x M24; Maximum Speed:1320 rpm; Seal Type:Viton Single Lip; Shaft Size:155 mm; Bearing UPC:013992033949; Dimension P:1.0 in; Dimension H:4.9 in; Support Type:Round Flange; Bearing Number:MSM155BX; Dimension R:18.3 in; Bearing - Housing - Seal:MSM155BXHRSS; |
| 231.20.0800.013 Type 21/950.1 Standard 5 Slewing Ring Bearings | Dimension H2:242 mm; Cr - Dynamic Load Rating:42039 lbf; Maximum Speed:2790 rpm; Ca - Axial Load Rating:2787.59 lbf; Cor - Static Load Rating:51931 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension L:380 mm; Series Type:Light Series; Bearing UPC:013992030948; Dimension H:112 mm; Bolt Size:2 x M24; Bearing Number:LSM90BR; Dimension J:320 mm; Shaft Size:90 mm; Housing Width:5.3 in; Note:This product line wa; |
| 231.20.0800.503 Type 21/950.1 Standard 5 Slewing Ring Bearings | Series:30210U; R - Cone Backface To Clear Radius1:1.520 mm; e - ISO Factor8:0.42; K - Factor7:1.39; C - Cup Width:17.000 mm; d:50.000 mm; Design Units:METRIC; da - Cone Frontface Backing Diameter:57.91 mm; r - Cup Backface To Clear Radius2:1.52 mm; Db - Cup Backface Backing Diameter:81.03 mm; Bearing Weight:0.6 Kg; C1 - Dynamic Radial Rating (1 million revolutions)5:86000 N; Cone Part Number:X30210UM; |
| A16-95N6 Rotek Slewing Ring Bearings | D:2.7500 in; Triple Seal 2 Req’d:LOR 128; F:5.875 in; Assembly Weight:395 lb; E Max.:23.6250 in; Bearing Number:22330K; E Min.:20.8750 in; Full Timken Part Number:SDAF226305-3/8; B:26.7500 in; L2:9.7500 in; H1:15.1875 in; Oil Level K:2.8750 in; Y:3.2656 in; Bolt Hole Length:2.625 in; Diameter S-1:5 3/8 in; A:7.50 in; No. of Base Bolts Required:4; Housing Only4:SDAF630 x 5-3/8; Bolt Hole Width:1.250 in; |
| 282.30.0975.013 Type 110/1100.2 Standard 5 Slewing Ring Bearings | Design Units:Imperial; Series:78000; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:3.11 in; da - Cone Frontface Backing Diameter:3.11 in; G1 - Heat Generation Factor (Roller-Raceway)8:62.6; Cg - Geometry Factor9:0.0884; Ab - Cage-Cone Frontface Clearance:0.08 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:17400 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:9970 lbf; |