| RK6-25N1Z Kaydon Slewing Ring Bearings | P120°:45.4 kN; ba:34.925 mm; Labyrinth ring:2 x LOR 186; da:77.787 mm; P60°:121 kN; Cap bolt, SAE grade:5; Cap bolt:2 x 5/8-11 UNC; R2:27.781 mm; Stabilizing ring:2 x SR-1518; H2:41.275 mm; Housing:SAF 518; Cap bolt recommended tightening torque:149.1 N·m; J min.:260.35 mm; P90°:72.5 kN; J max.:298.45 mm; End plug (suffix Y):EPR 11; Initial grease fill:286.33 g; H:192.484 mm; P180°:49.8 kN; |
| 16283001 Kaydon Slewing Ring Bearings | Stabilizing ring:SR-17-14; S:4.763 mm; R2:22.225 mm; P120°:31.6 kN; A1:88.9 mm; H:180.975 mm; Housing:SAF 517; h:34.925 mm; R1:53.975 mm; J min.:250.825 mm; P180°:34.7 kN; Da:150 mm; da:71.438 mm; PG:1/8 NPT; RG:3/8 NPT; Cap bolt, SAE grade:5; N1:22.225 mm; H1:95.25 mm; Initial grease fill:110.56 g; End plug (suffix Y):EPR 9; |
| HS6-16P1Z Kaydon Slewing Ring Bearings | Reference grease quantity Gref:23 cm³; Static axial stiffness, preload class B:149 N/µm; Basic static load rating C0:45 kN; Number of balls z:30; b:1.8 mm; a:32.9 mm; C1:9.05 mm; r1,2 min.:2 mm; Fatigue load limit Pu:1.6 kN; Calculation factor f2B:1.03; d2:129.2 mm; C3:5.4 mm; ra max.:2 mm; dn:135.4 mm; Preload class A GA:250 N; Calculation factor fHC:1; Da max.:161.2 mm; Calculation factor f1:1; |
| 68779A Franke Slewing Ring Bearings | Sleeve:S 128x5; Hydraulic nut:HMVC 28E; Threads per inch:12; B1:134.95 mm; d3 max.:180.315 mm; G:139.624 mm; d1:127 mm; B4:23.012 mm; B:24.079 mm; d:140 mm; Mass adapter sleeve assembly:5.9 kg; |
| 16374001 Kaydon Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:10000 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Seals & Snap-Rin; D:62.0000 mm; Basic Dynamic Radial Load Rating C:19500 N; Basic Static Radial Load Rating Co:11200 N; B:16.00 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Sealed Speed Rating n3:7500 rpm; d:30.000 mm; Grease Speed Rating n1:10000 rpm; Oil Speed Rating n2:13000 rpm; |
| 90-20 0541/0-37022 IMO Slewing Ring Bearings | Mass bushing:0.036 kg; Tolerance shaft:h8; Permissible sliding velocity v min.:0.25 m/s; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Specific dynamic load factor K:10 N/mm²; Coefficient of friction µ max.:0.1; B:25 mm; Tolerance housing:H7; d:25 mm; D:30 mm; |
| MTO-210T Kaydon Slewing Ring Bearings | α:20 °; B:500 mm; d:510 mm; K:12 mm; C:500 mm; Design variant/feature:BC4.10/W33WI; r1,2 min.:22 mm; Basic static load rating C0:26000 kN; Basic dynamic load rating C:9680 kN; Fatigue load limit Pu:2080 kN; D:680 mm; r3,4 min.:3 mm; Mass bearing:522 kg; F:560 mm; D1 ≈:630.6 mm; b:22.3 mm; |
| 77300A Franke Slewing Ring Bearings | d:60.000 mm; Basic Static Radial Load Rating Co:52000 N; B:31.00 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating n2:6000 rpm; Grease Speed Rating Open/Shielded n1:5000 rpm; Accessories:Two Shields; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:81900 N; D:130.0000 mm; Grease Speed Rating n1:5000 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; |
| 68801A Franke Slewing Ring Bearings | Pa:7.83 kN; H:169.863 mm; Ca:42.799 mm; H1:88.9 mm; P120°:21.8 kN; Cap bolt, SAE grade:5; N1:19.05 mm; Cap bolt:2 x 5/8-11 UNC; h:31.75 mm; S:4.763 mm; A2:209.55 mm; RG:3/8 NPT; Max. speed for Taconite seal:1150 r/min; J1:53.975 mm; P90°:36 kN; PG:1/8 NPT; Initial grease fill:87.885 g; Taconite seal:TER 45; L:330.2 mm; Appropriate attachment bolt size G:0.625 in; |
| HS6-21E1Z Kaydon Slewing Ring Bearings | Mass adapter sleeve assembly:0.1 kg; B1:27 mm; B:7 mm; B4:8 mm; d:30 mm; d3:45 mm; d1:23.813 mm; G:M 30x1.5; |
| MTO-170T Kaydon Slewing Ring Bearings | B:49.20 mm; Fillet Radius ra:2.00 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:119000 N; d:55.000 mm; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:3800 rpm; Accessories:Two Seals; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:122000 N; |
| 12-20 0941/1-32262 IMO Slewing Ring Bearings | Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; Tolerance shaft:e7; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; D:14 mm; d:9 mm; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; B:16 mm; Mass bushing:0.013 kg; Specific static load factor K0:45 N/mm²; |
| 68781A Franke Slewing Ring Bearings | Cap bolt:1-8 UNC; S:4.763 mm; Cap bolt recommended tightening torque:1220 N·m; PG:1/4 NPT; H2:69.85 mm; P60°:345 kN; A1:171.45 mm; H:360.363 mm; L:628.65 mm; PosiTrac Plus contact element:2 x B10724-140; R2:37.306 mm; Mass pillow block:168 kg; P90°:207 kN; End plug (suffix Y):EPR 18; Pa:43.6 kN; da:149.225 mm; P180°:133 kN; Initial grease fill:878.85 g; RG:3/4 NPT; Stabilizing ring:SR-34-0; |
| 12-20 0311/1-32202 IMO Slewing Ring Bearings | R2:28.575 mm; P90°:77 kN; P150°:44.5 kN; J1:57.15 mm; Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; Max. speed for Taconite seal:950 r/min; P60°:128 kN; End plug (suffix Y):EPR 11; P120°:48.9 kN; N1:22.225 mm; J max.:342.9 mm; ba:42.069 mm; Stabilizing ring:2 x SR-1618; H2:50.8 mm; P180°:54.3 kN; Cap bolt, SAE grade:8; Housing:SAF 618; H:230.981 mm; Taconite seal:TER 188; |