| Komatsu PC40-7 Hydraulic Final Drive Motor | Oil Speed Rating n2:1500 rpm; B:156.00 mm; d:190.000 mm; Grease Speed Rating n1:1300 rpm; D:400.0000 mm; Fillet Radius ra:4.00 mm; Basic Static Radial Load Rating Co:1430000 N; Basic Dynamic Radial Load Rating C:832000 N; Fillet Radius rb:1.50 mm; |
| Komatsu PC228US-2 Hydraulic Final Drive Motor | Seals or Shields:Open Type; B:44.4mm; d:80mm; Clearance:Standard; D:140mm; Cage Type:Brass; Availability:In Stock; SKU:3216m-qbl; Weight:0.02 KGS; |
| Komatsu PC70-7E-B Hydraulic Final Drive Motor | d3:180 mm; d1:133.35 mm; Locking device:MBL 30; G:M 150x2; Lock nut:KML 30; Hydraulic nut:HMV 30 E; B1:139 mm; B4:26 mm; d:150 mm; Mass adapter sleeve assembly:6.15 kg; |
| Komatsu PC30MR-2-A Hydraulic Final Drive Motor | Cage Type:Brass; Clearance:Standard; Limiting Speed Rating (r/min):3800; Weight:24.00 KGS; Reference Speed Rating (r/min):2800; SKU:qj328n2ma-skf; D:300mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):500; Fatigue Load Rating (kN):20; |
| Komatsu PC450-7E0 Hydraulic Final Drive Motor | Calculation factor Y1:3.4; Calculation factor e:0.2; Basic static load rating C0:20000 kN; Limiting speed:480 r/min; K:12 mm; B2 ≈:326 mm; B:258 mm; G1:50 mm; Da max.:1122 mm; Basic dynamic load rating C:10335 kN; |
| Komatsu PC75UD-3 Hydraulic Final Drive Motor | B:13mm; Fatigue Load Rating (kN):--; D:42mm; Limiting Speed Rating (r/min):17000; Static Load Rating (kN):5.45; Weight:0.02 KGS; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):11.4; d:15mm; Reference Speed Rating (r/min):--; |
| Komatsu PC75 Hydraulic Final Drive Motor | da:79.375 mm; Adapter sleeve assembly:SNW 18x3.1/8; J max.:298.45 mm; Appropriate attachment bolt size G:0.75 in; P150°:40.5 kN; RG:3/8 NPT; J min.:260.35 mm; Ca:49.809 mm; P120°:45.4 kN; L:349.25 mm; |
| Komatsu PC300LC-7 Hydraulic Final Drive Motor | Seals or Shields:Open Type; d:55mm; Clearance:Standard; Static Load Rating (kN):156; Availability:In Stock; D:120mm; Axial Static Stiffness:2080; Cage Type:Plastic; B:20mm; SKU:bsb055120duhp3-rhp; |
| Komatsu PC360-7 Hydraulic Final Drive Motor | A1:120.65 mm; End plug (suffix Y):EPR 14; Cap bolt recommended tightening torque:298.3 N·m; P60°:249 kN; P180°:107 kN; Initial grease fill:379.89 g; PG:1/4 NPT; H2:53.975 mm; Stabilizing ring:SR-24-20; P90°:149 kN; |
| Komatsu PC350HD-8 Hydraulic Final Drive Motor | Mass needle roller and cage assembly:0.012 kg; Fw:20 mm; Reference speed:19000 r/min; Designation associated G design radial shaft seal with a low cross-sectional height:G 20x26x4; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x26x4; U:13 mm; Ew:26 mm; Basic dynamic load rating C:13.8 kN; Limiting speed:22000 r/min; Fatigue load limit Pu:2.16 kN; |
| Komatsu PC27MR-2 Hydraulic Final Drive Motor | Static axial stiffness, preload class C:392 N/µm; Reference grease quantity Gref:7.5 cm³; D:125 mm; D1:114.2 mm; d2:100.8 mm; rb max.:0.6 mm; K:0.5 mm; Basic static load rating C0:48 kN; ra max.:1 mm; C1:5.2 mm; |
| Komatsu PC270-8 Hydraulic Final Drive Motor | Basic Static Radial Load Rating Co:60000 N; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; d:50.000 mm; D:90.0000 mm; Oil Speed Rating n2:19000 rpm; Grease Speed Rating n1:13000 rpm; Basic Dynamic Radial Load Rating C:60500 N; B:40.00 mm; |
| Komatsu PC75UU-2 Hydraulic Final Drive Motor | SKU:6215m-nsk; Oil Limiting Speed (r/min):5600; Grease Limiting Speed (r/min):4800; D:130mm; Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):49.5; Cage Type:Brass; B:25mm; Dynamic Load Rating (kN):66; |
| Komatsu PC20MR-1 Hydraulic Final Drive Motor | Seals or Shields:Open Type; B:30mm; d:90mm; Speed Rating (r/min):8000; SKU:3mm218wicrsum-timken; Dynamic Load Rating (kN):92.5; Availability:In Stock; Weight:2.20 KGS; Cage Type:Plastic; D:160mm; |
| Komatsu PC300LL-7E0 Hydraulic Final Drive Motor | SKU:22217e-qbl; d:85mm; Availability:In Stock; D:150mm; Clearance:Standard; B:36mm; Seals or Shields:Open Type; Cage Type:Steel; Weight:0.02 KGS; |
| Komatsu PC240LC-8 Hydraulic Final Drive Motor | Fatigue load limit Pu:114 kN; D:155 mm; Shaft washer:WS 89318; Housing washer:GS 89318; d:90 mm; Basic static load rating C0:1160 kN; Limiting speed:2000 r/min; Dw:12 mm; Eb:151 mm; Mass roller and cage thrust assembly:0.97 kg; |